Commit c37e4b51 authored by bouwhuim.nikhef.nl's avatar bouwhuim.nikhef.nl
Browse files

release rev20170706

parents
-- file: cmp_sys_clk_pll_wrap.vhd
--
-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
------------------------------------------------------------------------------
-- User entered comments
------------------------------------------------------------------------------
-- None
--
------------------------------------------------------------------------------
-- "Output Output Phase Duty Pk-to-Pk Phase"
-- "Clock Freq (MHz) (degrees) Cycle (%) Jitter (ps) Error (ps)"
------------------------------------------------------------------------------
-- CLK_OUT1____62.500______0.000______50.0______137.150_____96.948
-- CLK_OUT2___125.000______0.000______50.0______119.348_____96.948
--
------------------------------------------------------------------------------
-- "Input Clock Freq (MHz) Input Jitter (UI)"
------------------------------------------------------------------------------
-- __primary_________125.000____________0.010
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
use ieee.numeric_std.all;
library unisim;
use unisim.vcomponents.all;
entity cmp_sys_clk_pll is
port
(-- Clock in ports
clk_i : in std_logic;
-- Clock out ports
clk_62_5_o : out std_logic;
clk_125_o : out std_logic;
-- Status and control signals
rst_i : in std_logic;
locked_o : out std_logic
);
end cmp_sys_clk_pll;
architecture xilinx of cmp_sys_clk_pll is
attribute CORE_GENERATION_INFO : string;
attribute CORE_GENERATION_INFO of xilinx : architecture is "cmp_sys_clk_pll_wrap,clk_wiz_v3_6,{component_name=cmp_sys_clk_pll_wrap,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,feedback_source=FDBK_ONCHIP,primtype_sel=MMCM_ADV,num_out_clk=2,clkin1_period=8.000,clkin2_period=10.000,use_power_down=false,use_reset=true,use_locked=true,use_inclk_stopped=false,use_status=false,use_freeze=false,use_clk_valid=false,feedback_type=SINGLE,clock_mgr_type=MANUAL,manual_override=false}";
-- Input clock buffering / unused connectors
signal clkin1 : std_logic;
-- Output clock buffering / unused connectors
signal clkfbout : std_logic;
signal clkout0 : std_logic;
signal clkout1 : std_logic;
begin
-- Input buffering
--------------------------------------
clkin1_buf : BUFG
port map
(O => clkin1,
I => clk_i);
-- Clocking primitive
--------------------------------------
-- Instantiation of the MMCM primitive
-- * Unused inputs are tied off
-- * Unused outputs are labeled unused
mmcm_adv_inst : MMCME2_ADV
generic map
(BANDWIDTH => "OPTIMIZED",
CLKOUT4_CASCADE => FALSE,
COMPENSATION => "ZHOLD",
STARTUP_WAIT => FALSE,
DIVCLK_DIVIDE => 1,
CLKFBOUT_MULT_F => 8.000,
CLKFBOUT_PHASE => 0.000,
CLKFBOUT_USE_FINE_PS => FALSE,
CLKOUT0_DIVIDE_F => 16.000,
CLKOUT0_PHASE => 0.000,
CLKOUT0_DUTY_CYCLE => 0.500,
CLKOUT0_USE_FINE_PS => FALSE,
CLKOUT1_DIVIDE => 8,
CLKOUT1_PHASE => 0.000,
CLKOUT1_DUTY_CYCLE => 0.500,
CLKOUT1_USE_FINE_PS => FALSE,
CLKIN1_PERIOD => 8.000,
REF_JITTER1 => 0.010)
port map
-- Output clocks
(CLKFBOUT => clkfbout,
CLKFBOUTB => open,
CLKOUT0 => clkout0,
CLKOUT0B => open,
CLKOUT1 => clkout1,
CLKOUT1B => open,
CLKOUT2 => open,
CLKOUT2B => open,
CLKOUT3 => open,
CLKOUT3B => open,
CLKOUT4 => open,
CLKOUT5 => open,
CLKOUT6 => open,
-- Input clock control
CLKFBIN => clkfbout,
CLKIN1 => clkin1,
CLKIN2 => '0',
-- Tied to always select the primary input clock
CLKINSEL => '1',
-- Ports for dynamic reconfiguration
DADDR => (others => '0'),
DCLK => '0',
DEN => '0',
DI => (others => '0'),
DO => open,
DRDY => open,
DWE => '0',
-- Ports for dynamic phase shift
PSCLK => '0',
PSEN => '0',
PSINCDEC => '0',
PSDONE => open,
-- Other control and status signals
LOCKED => locked_o,
CLKINSTOPPED => open,
CLKFBSTOPPED => open,
PWRDWN => '0',
RST => rst_i);
-- Output buffering
-------------------------------------
clk_65_5_buf : BUFG
port map
(O => clk_62_5_o,
I => clkout0);
clk_125_buf : BUFG
port map
(O => clk_125_o,
I => clkout1);
end xilinx;
-- file: cmp_sys_clk_pll_wrap.vhd
--
-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
------------------------------------------------------------------------------
-- User entered comments
------------------------------------------------------------------------------
-- None
--
------------------------------------------------------------------------------
-- "Output Output Phase Duty Pk-to-Pk Phase"
-- "Clock Freq (MHz) (degrees) Cycle (%) Jitter (ps) Error (ps)"
------------------------------------------------------------------------------
-- CLK_OUT1____62.500______0.000______50.0______137.150_____96.948
-- CLK_OUT2___125.000______0.000______50.0______119.348_____96.948
--
------------------------------------------------------------------------------
-- "Input Clock Freq (MHz) Input Jitter (UI)"
------------------------------------------------------------------------------
-- __primary_________125.000____________0.010
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
use ieee.numeric_std.all;
library unisim;
use unisim.vcomponents.all;
entity cmp_sys_clk_pll_wrap is
port
(-- Clock in ports
CLK_IN1 : in std_logic;
CLKFB_IN : in std_logic;
-- Clock out ports
CLK_OUT1 : out std_logic;
CLK_OUT2 : out std_logic;
CLKFB_OUT : out std_logic;
-- Status and control signals
RESET : in std_logic;
LOCKED : out std_logic
);
end cmp_sys_clk_pll_wrap;
architecture xilinx of cmp_sys_clk_pll_wrap is
attribute CORE_GENERATION_INFO : string;
attribute CORE_GENERATION_INFO of xilinx : architecture is "cmp_sys_clk_pll_wrap,clk_wiz_v3_6,{component_name=cmp_sys_clk_pll_wrap,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,feedback_source=FDBK_ONCHIP,primtype_sel=MMCM_ADV,num_out_clk=2,clkin1_period=8.000,clkin2_period=10.000,use_power_down=false,use_reset=true,use_locked=true,use_inclk_stopped=false,use_status=false,use_freeze=false,use_clk_valid=false,feedback_type=SINGLE,clock_mgr_type=MANUAL,manual_override=false}";
-- Input clock buffering / unused connectors
signal clkin1 : std_logic;
-- Output clock buffering / unused connectors
signal clkfbout : std_logic;
signal clkfboutb_unused : std_logic;
signal clkout0 : std_logic;
signal clkout0b_unused : std_logic;
signal clkout1 : std_logic;
signal clkout1b_unused : std_logic;
signal clkout2_unused : std_logic;
signal clkout2b_unused : std_logic;
signal clkout3_unused : std_logic;
signal clkout3b_unused : std_logic;
signal clkout4_unused : std_logic;
signal clkout5_unused : std_logic;
signal clkout6_unused : std_logic;
-- Dynamic programming unused signals
signal do_unused : std_logic_vector(15 downto 0);
signal drdy_unused : std_logic;
-- Dynamic phase shift unused signals
signal psdone_unused : std_logic;
-- Unused status signals
signal clkfbstopped_unused : std_logic;
signal clkinstopped_unused : std_logic;
begin
-- Input buffering
--------------------------------------
clkin1_buf : IBUFG
port map
(O => clkin1,
I => CLK_IN1);
-- Clocking primitive
--------------------------------------
-- Instantiation of the MMCM primitive
-- * Unused inputs are tied off
-- * Unused outputs are labeled unused
mmcm_adv_inst : MMCME2_ADV
generic map
(BANDWIDTH => "OPTIMIZED",
CLKOUT4_CASCADE => FALSE,
COMPENSATION => "ZHOLD",
STARTUP_WAIT => FALSE,
DIVCLK_DIVIDE => 1,
CLKFBOUT_MULT_F => 8.000,
CLKFBOUT_PHASE => 0.000,
CLKFBOUT_USE_FINE_PS => FALSE,
CLKOUT0_DIVIDE_F => 16.000,
CLKOUT0_PHASE => 0.000,
CLKOUT0_DUTY_CYCLE => 0.500,
CLKOUT0_USE_FINE_PS => FALSE,
CLKOUT1_DIVIDE => 8,
CLKOUT1_PHASE => 0.000,
CLKOUT1_DUTY_CYCLE => 0.500,
CLKOUT1_USE_FINE_PS => FALSE,
CLKIN1_PERIOD => 8.000,
REF_JITTER1 => 0.010)
port map
-- Output clocks
(CLKFBOUT => clkfbout,
CLKFBOUTB => clkfboutb_unused,
CLKOUT0 => clkout0,
CLKOUT0B => clkout0b_unused,
CLKOUT1 => clkout1,
CLKOUT1B => clkout1b_unused,
CLKOUT2 => clkout2_unused,
CLKOUT2B => clkout2b_unused,
CLKOUT3 => clkout3_unused,
CLKOUT3B => clkout3b_unused,
CLKOUT4 => clkout4_unused,
CLKOUT5 => clkout5_unused,
CLKOUT6 => clkout6_unused,
-- Input clock control
CLKFBIN => CLKFB_IN,
CLKIN1 => clkin1,
CLKIN2 => '0',
-- Tied to always select the primary input clock
CLKINSEL => '1',
-- Ports for dynamic reconfiguration
DADDR => (others => '0'),
DCLK => '0',
DEN => '0',
DI => (others => '0'),
DO => do_unused,
DRDY => drdy_unused,
DWE => '0',
-- Ports for dynamic phase shift
PSCLK => '0',
PSEN => '0',
PSINCDEC => '0',
PSDONE => psdone_unused,
-- Other control and status signals
LOCKED => LOCKED,
CLKINSTOPPED => clkinstopped_unused,
CLKFBSTOPPED => clkfbstopped_unused,
PWRDWN => '0',
RST => RESET);
-- Output buffering
-------------------------------------
CLKFB_OUT <= clkfbout;
CLK_OUT1 <= clkout0;
CLK_OUT2 <= clkout1;
end xilinx;
# Date: Mon Jul 01 07:17:22 2013
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc7k325t
SET devicefamily = kintex7
SET flowvendor = Other
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = ffg900
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -2
SET verilogsim = false
SET vhdlsim = true
SET workingdirectory = .\tmp\
# CRC: 67432d57
//////////////////////////////////////////////////////////////////////
//// ////
//// eth_clockgen.v ////
//// ////
//// This file is part of the Ethernet IP core project ////
//// http://www.opencores.org/projects/ethmac/ ////
//// ////
//// Author(s): ////
//// - Igor Mohor (igorM@opencores.org) ////
//// ////
//// All additional information is avaliable in the Readme.txt ////
//// file. ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2001 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.2 2001/10/19 08:43:51 mohor
// eth_timescale.v changed to timescale.v This is done because of the
// simulation of the few cores in a one joined project.
//
// Revision 1.1 2001/08/06 14:44:29 mohor
// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
// Include files fixed to contain no path.
// File names and module names changed ta have a eth_ prologue in the name.
// File eth_timescale.v is used to define timescale
// All pin names on the top module are changed to contain _I, _O or _OE at the end.
// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
// and Mdo_OE. The bidirectional signal must be created on the top level. This
// is done due to the ASIC tools.
//
// Revision 1.1 2001/07/30 21:23:42 mohor
// Directory structure changed. Files checked and joind together.
//
// Revision 1.3 2001/06/01 22:28:55 mohor
// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
//
//
`include "timescale.v"
module eth_clockgen(Clk, Reset, Divider, MdcEn, MdcEn_n, Mdc);
parameter Tp=1;
input Clk; // Input clock (Host clock)
input Reset; // Reset signal
input [7:0] Divider; // Divider (input clock will be divided by the Divider[7:0])
output Mdc; // Output clock
output MdcEn; // Enable signal is asserted for one Clk period before Mdc rises.
output MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
reg Mdc;
reg [7:0] Counter;
wire CountEq0;
wire [7:0] CounterPreset;
wire [7:0] TempDivider;
assign TempDivider[7:0] = (Divider[7:0]<2)? 8'h02 : Divider[7:0]; // If smaller than 2
assign CounterPreset[7:0] = (TempDivider[7:0]>>1) -1; // We are counting half of period
// Counter counts half period
always @ (posedge Clk or posedge Reset)
begin
if(Reset)
Counter[7:0] <= #Tp 8'h1;
else
begin
if(CountEq0)
begin
Counter[7:0] <= #Tp CounterPreset[7:0];
end
else
Counter[7:0] <= #Tp Counter - 8'h1;
end
end
// Mdc is asserted every other half period
always @ (posedge Clk or posedge Reset)
begin
if(Reset)
Mdc <= #Tp 1'b0;
else
begin
if(CountEq0)
Mdc <= #Tp ~Mdc;
end
end
assign CountEq0 = Counter == 8'h0;
assign MdcEn = CountEq0 & ~Mdc;
assign MdcEn_n = CountEq0 & Mdc;
endmodule
//////////////////////////////////////////////////////////////////////
//// ////
//// eth_cop.v ////
//// ////
//// This file is part of the Ethernet IP core project ////
//// http://www.opencores.org/projects/ethmac/ ////
//// ////
//// Author(s): ////
//// - Igor Mohor (igorM@opencores.org) ////
//// ////
//// All additional information is avaliable in the Readme.txt ////
//// file. ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2001, 2002 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.3 2002/10/10 16:43:59 mohor
// Minor $display change.
//
// Revision 1.2 2002/09/09 12:54:13 mohor
// error acknowledge cycle termination added to display.
//
// Revision 1.1 2002/08/14 17:16:07 mohor
// Traffic cop with 2 wishbone master interfaces and 2 wishbona slave
// interfaces:
// - Host connects to the master interface
// - Ethernet master (DMA) connects to the second master interface
// - Memory interface connects to the slave interface
// - Ethernet slave interface (access to registers and BDs) connects to second